Home page

Glass fiber insulation self-adhesive tape

This tape is coated with self-adhesive silicone resin on both sides of the fiberglass fabric, which is then irradiated, cured, and cut into the required width.

Classificar:

Silicone Self-fusing Tape

E-MAIL：

wyq@cn-dianpei.com

Product inquiry

Product introduction

This tape is coated with self-adhesive silicone resin on both sides of the fiberglass fabric, which is then irradiated, cured, and cut into the required width.

Product instructions

When using, remove the isolation film and wrap it in half a stack around the coil or wire rod.

Without the need for barbecue, it can form a waterproof, high-temperature, and high-voltage insulation whole.

Scope of product use

It is mainly used for insulation protection of coils such as electric furnaces, induction coils, reactor coils, dry transformers, traction motors, linear motors, etc.

Product parameters

No.	Performance	Unit	Require	Result
1	Appearance	/	The silicone rubber is evenly distributed, without obvious impurities or defects, and the tape is attached with a layer of isolation film
2	Thickness	mm	0.3±0.05	0.3
3	Tensile Strength	N/25mm	≥150	280
4	Elongation	%	≥20	34
5	Breakdown Voltage (Normal)	KV	≥8	10
6	Self-Adhesive	MPa	≥24	26
7	Temperature Index	/	≥180	Pass
8	Quality Guarantee Period	Month	≥12